Products
150W Single Output DC-DC Converter SD-150series
150W Single Output DC-DC ConverterSD-150 rige
2:1 breed ynfierberik
Beskermingen: Kortsluting / Overload / Overspanning
1500VAC I / O isolaasje
Ynboude EMI-filter, leech rimpellûd
100% folsleine load burn-in test
24V en 48V ynfier voltage design ferwize nei LVD
Lege kosten, hege betrouberens
2 jier garânsje
| SPESIFIKASJE | |||||||||
| OUTPUT | |||||||||
| Model | SD-150A-5 | SD-150B-5 | SD-150C-5 | SD-150B-12 | SD-150C-12 | SD-150D-12 | SD-150B-24 | SD-150C-24 | SD-150D-24 |
| DC spanning | 5V | 12V | 24V | ||||||
| Rated Aktueel | 30A | 12.5A | 6.3A | ||||||
| Aktuele Range | 0-30A | 0 ~ 12.5A | 0 ~ 6.3A | ||||||
| Rated Power | 150W | 150W | 151.2W | ||||||
| Ripple & Noise | 120 mVp-p | 120 mVp-p | 150 mVp-p | ||||||
| Voltage Adj.Berik | 4,5 ~ 5,5 VDC | 11 ~ 16VDC | 23 ~ 30 VDC | ||||||
| Voltage Tolerânsje | ±1,0% | ±1,0% | ±1,0% | ||||||
| Line Regeling | ± 0,5% | ± 0,5% | ±0.3% | ||||||
| Load Regeling | ± 0,5% | ± 0,5% | ±0.3% | ||||||
| Setup, Rise Time | 2s, 50ms by folsleine lading | ||||||||
| Hold Up Tiid | 24ms (allinich D-modus) by folsleine lading | ||||||||
| YNFIER | |||||||||
| Voltage Range | A:9.2~18VDC B:19~36VDC C:36~72VDC D:72~144VDC of 85~132VAC | ||||||||
| Effisjinsje | 70% | 73% | 76% | 75% | 77% | 79% | 77% | 80% | 82% |
| Inrush Current | D: 22,5A/96VDC | ||||||||
| Leakage Strom | <0.75mA / 120VAC (SD-150D) | ||||||||
| BESKERMING | |||||||||
| Over Load | 105 ~ 135% rated útfier krêft | ||||||||
| Beskermingstype: Hiccup-modus, herstelt automatysk neidat de foutbetingst is fuorthelle | |||||||||
| Over Voltage | 16.8V ~ 20V/10% LOAD | 31.5 ~ 37.5V/10% LOAD | |||||||
| Beskermingstype: Hiccup-modus, herstelt automatysk neidat de foutbetingst is fuorthelle | |||||||||
| MILJEU | |||||||||
| Wurk Temp. | -10 ~ +60 ℃ (ferwize nei "Derating Curve") | ||||||||
| Working Feuchte | 20 ~ 90% RH net-kondensearjend | ||||||||
| Storage Temp., Feuchte | -20 ~ +85 ℃, 10 ~ 95% RH | ||||||||
| Temp.Koëffisjint | ±0.03%/℃ (0 ~ 50℃) | ||||||||
| Vibraasje | 10 ~ 500Hz, 2G 10min./1syklus, perioade foar 60min.elk lâns X, Y, Z assen | ||||||||
| SAFETY & EMC | |||||||||
| Safety Standards | IEC60950-1 CB goedkard troch TUV (allinich foar D-type) | ||||||||
| Standert spanning | I/PO/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||||||||
| Isolaasje ferset | I/PO/P, I/P-FG, O/P-FG: 100M Ohm / 500VDC / 25℃ / 70% RH | ||||||||
| EMC Emission | Konformiteit oan EN55022 (CISPR22) Klasse B | ||||||||
| EMC immuniteit | Konformiteit oan EN61000-4-2,3,4,6,8, nivo fan ljochte yndustry, kritearia A | ||||||||
| OTHERS | |||||||||
| Diminsje | 199*110*50mm (L*W*H) | ||||||||
| Gewicht | 0.86Kg | ||||||||
| Packing | 16pcs/14.5Kg/0.95CUFT | ||||||||
| NOAT | |||||||||
| 1. Alle parameters NET spesjaal neamd wurde mjitten op 24,48,96VDC input, rated load en 25 ℃ fan ambient temperatuer. 2. Ripple & lûd wurde mjitten op 20MHz fan bânbreedte troch it brûken fan in 12" twisted peardraad beëinige mei in 0.1uf & 47uf parallelle kondensator. 3. Tolerânsje: omfiemet opset tolerânsje, line regeljouwing en load regeljouwing. 4. De macht oanbod wurdt beskôge as in komponint dat wurdt ynstallearre yn in lêste apparatuer.De definitive apparatuer moat opnij befêstige wurde dat it noch foldocht oan EMC-rjochtlinen. | |||||||||
Skriuw jo berjocht hjir en stjoer it nei ús
